    |
||
          |
|
|
| ELECTRIC - Henderson PWS-E controls a 12 volt DC pump rated up to 3 G.P.M. It delivers constant flow to the variable displacement orifice. | ||
 |
 |
|
|
ON/OFF switch
High pressure LED to alert operator of clogged nozzles. Tank empty LED alerts operator of an empty tank. |
12 volt DC electric motor/pump combination. Drive system is completely enclosed by a molded fiberglass housing with a sealed removable lid. |
|
| Hydraulic I - Henderson PWS-H pre-wet systems are driven by the exhaust oil from the spreader conveyer/auger drive motor. This keeps the liquid gallon/ton proportional to the granular material regardless of conveyor speed. | ||
 |
 |
|
|
ON/OFF switch. High pressure LED to alert operator of clogged nozzles. Tank empty LED alerts operator of an empty tank. |
The gallon/ton is easily set by adjusting the manual flow divider in the rear mounted control box. Sealed enclosures, utilize compression fittings and all plumbing and electrical components. Stainless steel high pressure tubing. |
|
| Hydraulic II - Henderson PWS-H pre-wet systems are driven by the exhaust oil from the spreader conveyer/auger drive motor. This keeps the liquid gallon/ton proportional to the granular material regardless of conveyor speed. | ||
|
|
 |
|
|
ON/OFF switch. Console allows for "On the fly" variable adjustment of gallon/ton. High pressure LED to alert operator of clogged nozzles. Tank empty LED alerts operator of an empty tank . |
The gallon/ton is easily adjustable from the cab
via a PWM flow divider. Sealed enclosures, utilize compression fittings and all plumbing and electrical components. Stainless steel high pressure tubing. |
|
