HENDERSON NEWS & ARTICLES

APWA Washington Chapter - October 2016

The City of Spokane, WA hosted the 2016 Fall Conference & Maintenance Roadeo. Henderson's BrineXtreme Mobile Unit was on display in the parking area where the Roadeo was taking place.

Video: KREM NEWS 2


Henderson Products - Illinois - June 2016

Henderson Products' Illinois has moved into a new (larger) facility in Huntley, IL, just 15 minutes away from our old Gilberts location. This 28,000 sq. ft. facility is operational, secure and has seven acres of paved parking. The new address is: 11921 Smith Dr., Huntley, IL 60142. For full details, click on the press release below.

Press Release | Facility Photos | Directions


Cottonwood Heights, UT - May 2016

KSL, News Channel 5, featured the City of Cottonwood Heights, UT. In years past, the city has relied on contract labor for winter road maintenance. After listening to the residents of Cottonwood, the city decided it was time to reclaim this responsibility. They are purchasing 14 Mack trucks, upfitted with Henderson MARK E dump body, RSP snow plow and Task Force multipurpose spreader. For more information on this story use the links below.

Video: KSL NEWS 5 | Full Story KSL NEWS 5


Made in Eastern Iowa - April 2016

KCRG, News Channel 9, featured Henderson Products in thier story "Made in Eastern Iowa".

Video: KCRG NEWS 9 | Full Story KCRG NEWS 9


New ODOT Garage - November 2015

ODOT opens their new Allen County facility. This $4.2M project combines their two campuses into one centrally located facility. Featured in this news cast was their new and a fully automated Henderson BrineXtreme Ultimate brine making system. Their old system could make up to 12,000 gallons per day. The new BrineXtreme system will produce up to 50,000 gallons per day.

Video: Your News Now | Full Story Your News Now


Henderson Opens Missouri Location - July 2015

Henderson Products, Inc. officially opened our sixth and largest (40,000 sq. ft.) sales, installation, service and parts facility in Fulton, MO. This facility will employ up to 40 full-time employees. High-tech facilities like this are required to support today's complex snow and ice control equipment packages trending among municipal and state agencies. The equipment continues to get smarter in an effort to become more efficient, reduce waste and provide operators with the ability to adjust on the fly to changing winter weather conditions.

The official ribbon cutting ceremony was held on September 22, 2015. In attendance were multiple news outlets, the Fulton Area Development Foundation, the Fulton Chamber of Commerce and several other local businesses. After months of research, Henderson felt the Fulton area was a perfect fit (resident's skill sets and location) to best serve our existing and growing customer base. Click here for full employment details and opportunities.

Video: KOMU NEWS 8 | Full Story KOMU NEWS 8 | Video & Story: ABC NEWS 17


Henderson Hires Regional Sales Manager - March 2015

Henderson Products is proud to announce the hire of Mike Wyrick. Mike comes to Henderson with nearly two decades of experience in the truck equipment industry, previous stints at SwapLoader and Wired Rite. Stationed remotely in California, he'll support our independent dealers in the western U.S. and Canada.

Click Here for more details...


Introducing the BrineXtreme Truck Fill Pro - February 2015

The BrineXtreme® Truck Fill Pro is a stand-alone companion product, designed for use with Henderson’s mid-range and mobile brine makers. Its sole purpose is managing brine from the storage tank to the truck (100 GPM). The system: stainless steel construction, industrial grade components, plug-n-play installation, simple touch screen controls, key pad entry, multi-user setup, data logging and stacking capable (up to 3 products). This compact system provides total control over your brine loading experience.

Click Here for more details...


Douglas Dynamics Acquires Henderson Products - December 2014

This announcement is incredibly positive for both Douglas Dynamics and Henderson Products. Henderson is pleased to be joining the DD family and we believe this is an exciting opportunity for the company to expand its future growth objectives as part of a larger organization. Henderson and DD’s businesses have similar core values and both companies’ have strategic expertise in snow and ice control which can be leveraged to enhance the service and capabilities we provide to our customers and support our continued growth. We look forward to sharing expertise in 2015 and beyond.

Click Here for more details...


Introducing the BrineXtreme Pro - May 2014

Henderson’s BrineXtreme® Pro is revolutionizing the mid-range class of brine makers, introducing full automation and continuous brine production (up to 6,000 GPH). The system: stainless steel construction, industrial grade components, plug-n-play installation, simple touch screen operation, works with treated or untreated salt, handles coarse or fine salt crystals, delivers a precise 23.3% salt concentration by weight and eliminates human error. It’s an accurate high-performance high-volume brine system for the budget minded.

Click Here for more details...


Introducing the BlackBelt Maxx - August 2013

Henderson Products, Inc. is proud to introduce the BlackBelt Maxx. It's a major leap forward in the evolution of combination bodies. The level of technology and engineering expertise that’s gone into the BlackBelt Maxx is unmatched anywhere in the municipal equipment industry. Capabilities include: anti-ice applications, deicing applications, pre-wet applications, salt slurry generation, material hauling and high volume material conveying, perfect for feeding asphalt pavers or for shouldering projects.

Click Here for more details...


Introducing the BrineXtreme Ultimate Mobile Unit - February 2013

Henderson is once again pushing innovation to new levels by mobilizing its professional grade salt brine solutions. Where most systems would struggle to produce an accurate concentration in fluctuating temperatures, the BrineXtreme shines. Measuring concentration by density negates changing temperatures with readings remaining accurate to 0.001 SG. Other key features include: production rates up to 9,600 GPH (160 GPM), 5 cu. yd. capacity, expandable to 8 cu. yd., 100% automated operation from tank to truck, 100% automated clean out, easily handles treated or untreated salt, enclosure protects the salinity control and blending module, large touch screen display, event data logging, data log printing, remote access (LAN, Cellular or WiFi), optional blending module, optional truck fill station, truck fill range of 20-400 GPM and provides a truck fill readout with data logging.

Click Here for more details...


Introducing the MTP-Flex - January 2013

The MTP-Flex is a medium-duty trip-edge plow with an adjustable moldboard. The MTP-Flex is a crossover between the orginal MTP snow plow and the much larger RSP-Flex snow plow. It enjoys the best features of each and will serve as little brother to the RSP-Flex.

Click Here for more details...


Henderson Acquires BrineXtreme - October 2012

Henderson is proud to announce the acquisition of BrineXtreme. Over the past few decades, Henderson has been manufacturing anti-ice and pre-wet systems necessary to apply a salt brine solution to roadways. The synergy between these two great companies is nothing short of amazing. Henderson will retain the BrineXtreme name, as it will reside over the modular components: a brine making tank (stainless steel or fiberglass), salinity controls and a blending system.

Click Here for more details...


Introducing the Cone Basket - September 2012

Henderson's Cone Basket aids in the distribution and collection of traffic cones. It's available in two models (standard or extended) and connects to the work truck using any one of Henderson's quick hitch snow plow hitches. Its pivoting floor brackets are a key feature, allowing the cone basket to glide over low or rough areas in the roadway.

Click Here for more details...


EQUIPMENT WORLD - July 2012

Henderson's BlackBelt makes an appearance in Equipment World's July issue (pages 49-56). The article (Tote the Load) compares side dump trailers to end dump trailers. They also throw live bottom trailers and bottom dump trailers into the mix. This is a well written article that digs deep into the many options available for heavy haulers.

Pages 49-56 | Subscribe to Equipment World | BlackBelt - Live Bottom Trailer


EQUIPMENT WORLD - July 2012

Henderson's CHARGE System (Electric Snow & Ice Control) is featured inside the pages of Equipment World, July 2012 Issue. Featured as part of their product spotlight section.

Pages 16 | Subscribe to Equipment World | Charge - Electric Snow & Ice Control


BETTER ROADS - June 2012

Henderson's MTP (Medium-duty Trip-edge Plow) reversible snow plow was featured inside the pages of Better Roads Magazine, June 2012 Issue. The MTP continues to be a HOT seller and has drawn ample media attention. This plow brings heavy-duty capabilities to companies operating snow and ice control equipment on medium-duty trucks.

Page 39 | Subscribe to Better Roads | MTP - Medium-duty Trip-edge Plow


GOVERNMENT PRODUCT NEWS - May 2012

Henderson's CHARGE System (Electric Snow & Ice Control) is featured inside the pages of Government Product News, May 2012 Issue. The CHARGE was an instant hit with municipal fleets maximizing the snow and ice control capabilities of their medium-duty trucks. A first of its kind! For more information, use the links below.

Page 2 | Subscribe to GOVPRO | Charge - Electric Snow & Ice Control


TRAILER/BODY BUILDERS - April 2012

Henderson's CHARGE System (Electric Snow & Ice Control) is featured inside the pages of Trailer/Body Builders Magazine, April 2012 NTEA Work Truck Show Recap Issue. This section covered new records for manufacturer participation, floor space covered by manufacturers and many innovative product releases seen in 2012.

Page 38 | Subscribe to TBB | Charge - Electric Snow & Ice Control


MODERN CONTRACTOR SOLUTIONS - April 2012

Henderson's BlackBelt is featured inside the pages of Modern Contractor Solutions Magazine. MCS dug in deep, covering the BlackBelt right down to its core. To see the complete article, click on the link below.

Full Article | Subscribe to MCS | BlackBelt - Live Bottom Truck & Trailer


Introducing the CHARGE (All Electric System) - March 2012

The CHARGE clean-power series control system manages your work truck equipment from bumper-to-bumper. Capable of controlling the snow plow, dump body, lighting, sand/salt spreader, spinner and pre-wet application system. All managed from a convenient joystick controller that fits inside the cab's cup holder. Another first for the Snow & Ice Control Industry, by Henderson.

Click Here for more details...


Introducing the MTP Snow Plow - March 2012

The MTP is a medium-duty trip-edge plow and Henderson's first entry into the medium-duty plowing market. The MTP sets the stage, a medium-duty snow plow with heavy-duty snow plow characteristics. Features include: dual outboard reversing cylinders, trip-edge with adjustable torsion springs, three moldboard options (poly, carbon steel and stainless steel, level lift, low profile design/management, and more.

Click Here for more details...


Introducing the SMART LINK - September 2011

Henderson proudly introduces the Smart Link, a rotational floating wing mast. Features include; rotational float, low profile design, integrated trip, protected hydraulic cylinder, easy installation and greater safety for both the operator and cab.

Click Here for more details...


Introducing the HWS (Henderson Wing System) - August 2011

The HWS is Henderson's new modular wing system. It replaces the aging patrol wing, mid-mount wing and rear mount wing systems. Now designed with many common parts and capable of being placed in four different configurations from front to back.

Click Here for more details...


Introducing the Parallelogram Hitch - March 2011

Henderson introduces the Parallelogram Hitch at the 2011 NTEA Work Truck Show. The Parallelogram Hitch further cements Henderson's place as the most complete snow and ice control manufacturer.

Click Here for more details...


Introducing the RSP-FLEX Snow Plow - January 2011

Opening 2011, Henderson proudly introduces the RSP-Flex Snow Plow. Bend it to your will, to achieve the optimum shape for getting the job done right. It's truly an all-in-one reversible snow plow.

Click Here for more details...


HEAVY DUTY TRUCKING - December 2010

Bob Andrew, Director of the Equipment Division for the West Virginia DOT is featured. He discusses the addition of Hino 338 chassis into their fleet, Henderson MuniBody 35° and their heavy duty Henderson snow plow mount.

Full Article | Subscribe to HDT | MuniBody - Municipal Combination Body


TRAILER/BODY BUILDERS - September 2010

Henderson lands on the cover of Trailer/Body Builders Magazine, September 2010 Snow & Ice Issue.

Cover & Direct Cast Intro | Subscribe to TBB | Direct Cast - Precision Spinner


TRAILER/BODY BUILDERS - July 2008

Henderson introduces BlackBelt, the "Haul-It-All" live bottom trailer or chassis mounted body. Click below for article featured in Trailer/Body Builders Magazine.

BlackBelt Introduction | Subscribe to TBB | BlackBelt - Live Bottom Truck & Trailer


Henderson Products - Affiliations NTEA: National Truck Equipment Association MDTA: Missouri Dump Truckers Association CTEA: Canadian Transportation Equipment Association